Dfi Lanparty Ut Nf4 Sli Dr

To many, the DFI LANParty NF4 SLI-DR was simply the best enthusiast motherboard ever designed. Sure it had a few quirks, just there are few if any motherboards in contempo retentivity that come close to information technology in terms voltage and tweaking options. FutureMark's ORB is packed total of reasons why all the greatest overclockers are using this near legendary Athlon64 motherboard!

Since much of DFI's retail business comes from the enthusiast market, it makes sense for the visitor to listen to what consumers take to say. The original DFI LANParty NF4 SLI-DR was a huge success, but the company went back to the drawing board with feedback from consumers. Nine months later on, out popped a brand new LANPartyUT NF4 SLI-DR Expert motherboard.

Like the previous model, the DFI LANPartyUT NF4 SLI-DR Skillful motherboard is based on the nvidia nForce4 SLI chipset. It supports all Socket 939 AMD Athlon64/FX/X2 processors on the market, and is geared for gaming operation. The 4 DIMM slots tin be equipped with upwardly to 4GB of the fastest dual channel DDR memory available, just as you might expect.

In terms of onboard goodies, DFI is known to throw in everything only the kitchen sink in with its boards, the LANPartyUT NF4 SLI-DR Proficient is no exception. On the PCB y'all'll find a vii.1 channel sound codec, dual Gigabit NICs, an additional four channel Serial ATA controller and IEEE 1394a Firewire. If that's not enough for your needs, the DFI LANPartyUT NF4 SLI-DR Practiced has two PCI Express x16 slots for dual SLI videocards, a PCI Express x4 and x1 slot for high bandwidth peripherals and three PCI slots for legacy devices. There are a full of eight SATA 2 headers, and ii full channels for IDE devices.

DFI LANPartyUT NF4 SLI-DR Skillful Motherboard

Includes:
User'south Manual, Driver CD, 2x UV Reactive Rounded Ultra/133 IDE Cables, UV Reactive Rounded Floppy Cablevision, Four UV Reactive Serial ATA Cables, Two Molex to four Series ATA power cables, Silicon Image Driver Disk, Quick Installation guide, SLI Bridge, I/O Shield

HyperTransport on the LANPartyUT NF4 SLI-DR Good motherboard runs at a full 1 GHz, so bandwidth between the CPU and motherboard moves at a brisk viii GB/s. Because of the retention controller's dual nature compatibility, when running two PC3200 DDR DIMMs in dual channel in that location is half-dozen.4 GB/due south bachelor.

The layout of the DFI LANPartyUT NF4 SLI-DR Skilful is quite unlike from its predecessor. Nosotros'll become to the physical differences in a second, simply the DFI motherboard is nevertheless a pleasure to install gear into. It's clear that the engineers at DFI are too hardware enthusiasts, because the layout of the motherboard is really well washed. The audio ports still mount into the rear I/O area on a small-scale daughterboard, so remember to push button in the connector before installing the DFI LANPartyUT NF4 SLI-DR Expert into a instance.

Spotting the differences between the LANParty NF4 SLI-DR and LANPartyUT NF4 SLI-DR Skillful is quite easy. First the CPU socket has moved from near the center of the PCB on the original LANParty NF4 SLI-DR towards the top right hand corner.

The DIMM slots accept moved from a horizontal position to sit vertically near the rear I/O.

The DFI LANPartyUT NF4 SLI-DR Good is 1 of the few Athlon64 motherboards that crave a 24pin ATX power supply. Considering the motherboard's intended audience, this shouldn't be much of an issue, simply is something to consider when upgrading. Also, users should note that the LANPartyUT NF4 SLI-DR Expert has an eight pin ATX 12V connector instead of the four-pivot type we're all most familiar with.

On the PCB level, DFI has upgraded the motherboard power supply from three phase to four stage. This along with the increased power supply specs mean hardware enthusiasts should not suffer the aforementioned voltage stability issues that sometimes afflicted the original DFI LANParty NF4 SLI-DR motherboard. All power MOSFETs past the CPU socket are covered with passive aluminum heatsinks, and the nForce 4-SLI chipset is actively cooled.